Pavilion Board Plus

Pavilion » Products » Pavilion Board Plus

The Pavilion Board Plus baseboard is a heavy-duty baseboard ideal for busy areas such as offices, building corridors and apartments as well as homes! The Board Plus offers six different heating elements to choose from, each with a different output and capacity to create a baseboard system for any type of installation.

Pavilion Board Plus Features:

  • 18 Gauge steel front panel
  • Low profile design
  • Fully modulating snap-on damper – no hinges
  • Rugged support brackets
  • All copper/aluminum heating elements with expanded end for easy connections without the need for couplings
  • Many accessory choices to customize installation
Pavilion Board Plus
Model Tube Size Tube/Fin Fins per Ft. Flow Rate Average Hot Water Temperature °F/BTU's
170° 180° 190° 200° 210° 220° 230° 240°
Board Plus 003542 3/4" Copper/Al 58 4 GPM (2000 lbs./Hr.*) 710 800 890 970 1,070 1,150 1,250 1,330
Board Plus 003542 3/4" Copper/Al 58 1 GPM (500 lbs./Hr.) 670 760 840 920 1,010 1,090 1,180 1,260
Board Plus 003552 3/4" Copper/Al 51 4 GPM (2000 lbs./Hr.*) 770 870 970 1,070 1,160 1,270 1,360 1,460
Board Plus 003552 3/4" Copper/Al 51 1 GPM (500 lbs./Hr.) 730 820 920 1,010 1,100 1,200 1,290 1,380
Board Plus 003562 1" Copper/Al 58 4 GPM (2000 lbs./Hr.*) 680 760 850 930 1,030 1,110 1,190 1,280
Board Plus 003562 1" Copper/Al 58 1 GPM (500 lbs./Hr.) 640 720 800 880 970 1,050 1,130 1,210
Board Plus 003572 1" Copper/Al 51 4 GPM (2000 lbs./Hr.*) 740 840 930 1,040 1,130 1,230 1,320 1,420
Board Plus 003572 1" Copper/Al 51 1 GPM (500 lbs./Hr.) 700 790 880 980 1,070 1,160 1,250 1,340
Board Plus 003582 1-1/4" Copper/Al 51 4 GPM (2000 lbs./Hr.*) 710 800 900 990 1,090 1,180 1,290 1,380
Board Plus 003582 1-1/4" Copper/Al 51 1 GPM (500 lbs./Hr.) 670 760 850 940 1,030 1,120 1,220 1,310
Board Plus 00359 1-1/4" IPS Steel 48 4 GPM (2000 lbs./Hr.*) 610 690 770 850 930 1,010 1,090 1,170
Board Plus 00359 1-1/4" IPS Steel 48 1 GPM (500 lbs./Hr.) 580 650 730 800 880 960 1,030 1,110

1 Ratings are approved under the Latest Edition of the I=B=R Testing and Rating Code for Baseboard Radiation. As allowed by thiscode, 15% has been added for heatingeffect. Ratings are based on active finned length which is 3% less than ordering length. The use of I=B=R approved ratings at 4G.P.M. is recommended for all normal loop systems, where the water flow rate is equal to 4 G.P.M. When the flow is unknown, the I=B=R approved ratings at 1 G.P.M must beused.

2 I=B=R Ratings are based on active length, which is 4" less than total length, and includes a 15% addition for heating effect.

*Note: The use of I=B=R Ratings at 2000 lb/hr is limited to installations where the water flow rate through the baseboard unitis equal to or greater than 2000 lb/hr. Wherethe flow rate through the baseboard is not known; the rating at 500 lb/hr. must be used.
"X" Dimensions
Model No. 00354 00355 00356 00357 00358 00359
“X” No./In. 3-1/16 3-1/16 3-9/16 3-9/16 3-9/16 3-9/16
Pipe Size/In. 3/4 3/4 1 1 1-1/4 1-1/4

End Caps - 3" wide left and right,for use at doorways and wherever a finished end is needed.

Hinged End Caps - 5-1/4" wide left and right. Ideal for semi-recessed installation. Makes removal of front panel easier. Fits flush to the floor. Fully telescopic.

Extension Sets - 7" and 14" wide. Four sections (back, front, top and damper). Telescopes to fill gaps up to 12-1/2" between baseboard panels.

Wall Joiners - 5" and 9". fully telescopic to conceal connecting pipes.

Valve Enclosure - 9" wide left and right. Extra wide 6" hinged door for easy access to valve or vent. Fully telescopic.

Valve Enclosure (Slotted) - 9" wide left and right. Extra wide 6" hinged door for easy access to valve or vent. Fully telescopic.

Inside Corner - 90° and 135°/45°. One piece snap-on for easy installation. Telescopic up to 2-1/2" on each wall.

Outside Corner - 90° and 135°/45° . Use to trim corners at projecting wall. Telescopic up to 1" on each wall.

Splicer Set - 2" wide. Three piece snap-on-top, front and damper joiner. Joins adjacent baseboard panels. Supplied free of charge in 5 ft. to 8 ft. lengths.

Copper Return Bend - Custom designed 180° copper-to-copper return bend installs easily into enclosure, offering supply and return connection from one end of the baseboard. Return bend fits elements.

Tube Support - Provides support for return tube.